I - 5
General Information
When using bio-oils, always change the oil at the specified intervals due to aging of the oils.
Quantity lit Designation/Brand Designation/Brand
up to the top Standard engine oil SAE 20
dipstick marking or 20 W 40
0,2 l
Oil Quantities and Designations for the compressor
on request
on request
Oil Quantities and Designations for the On-Board Hydraulics
Quantity lit Designation/Brand Designation/Brand
Oil container on baler 10 Fuchs Renolin MR 46 MC
BP Energol SHF 46
Shell Tellus 46
Esso Univis N 46
Aral Vitan VS 46
Lubricant Quantities and Designations for the Gearboxes
Quantity lit Designation/Brand Designation/Brand
Main gearbox 15
Rake gearbox 2,5
Transfer gearbox Knoter/Raffer 0,8
Anglular gearbox up to the pick-up 0,8
Anglular gearbox down to the pick-up 0,15
Cutting system gearbox
for MultiCut top 2,75
Cutting system gearbox
for MultiCut bottom 3,85
Bio-Lubricants
SAE 90 or
Esso-Spartan EP 150
Shell Omala Öl 150
Fuchs - EP 85 W90
Castrol EPX 90
on request
Hydraulic Connections on the Tractor
Pick up lifting (yellow protective caps Single action control valve
Residual pack ejection Double action control valve
Blade controle MultiCut (blue protective caps) Single action control valve
Swath Distributor (yellow protective caps) Double action control valve
Electrical Connections on the Tractor
Baler lighting 7-pole socket
Constant current supply for the baler electrical control 3-pole socket
system (direct battery connection required)
To Next Page
Loading...
