I - 2
General Information
1.2.4 Proper Use
The rotary swather is designed exclusively for usual
applications during agricultural work (proper use).
Any further use is considered to be improper use. The
manufacturer is not liable for any damage resulting from
such use. Such use is solely at the operator's risk.
Part of the proper use is the adherence to the operating,
maintenance and repair instructions specified by the
manufacturer.
1.2.5 General Specifications
Driving on roads is only permissible with themachine in
the transport position.
Type Swadro 1010
Draft arm hitch standard
Number of rotors ea. 3
Number of arms/rotor ea. 10 / 13 /13
Number of double tines/arm ea. 4 / 4 / 5
Working width approx. mm 9700
Swather disc diameter middle/front/back approx. mm 2960 / 2x 3600
Height with tine arms approx. mm 4300
Height in working position approx. mm 1800
Height without tine arms/transport position [H] approx. mm 3800
Length [L] approx. mm 9800
Width in transport position [B] approx. mm 2995
Width in working position ca. mm 9700
Power requirement approx. KW/HP 59 / 80
PTO speed rpm max. 540 1/min
Equivalent continuous sound level below 70 dB(A)
Acreage capacity a.h 9 - 10
Tyre equipment
rotor gear tridem gear 16 x 6,50-8 4 PR
main gear 15.0/55-17 IMPL 10 PR
Tyre pressure feeler wheels and gear bar 1.0 / 2.0
Lighting voltage 12 Volt - 7-pole plug (DIN)
12 Volt - 3-pole plug (DIN)
Max. operating pressure of hydraulic system bar 200
Required hydraulic connections 2x EW
Max. permitted transport speed 40 km/h
Weight of machine [kg] 2920
Bearing load [kg] 1220
To Next Page