Krups Nescafe Dolce Gusto Lumio KP130110 - Page 23

Lumio service manual
23
OPERATING
To stop the rinsing
at any time, turn the
selection lever to the
middle position by hand.
17. Set bar display to level 7 with
selector wheel.
18. Push selection lever to left position
“COLD”.
19. Machine starts rinsing with cold
water.
20. Machine stops rinsing and indicator
light blinks red for a few seconds.
21. Wait until selection lever moves back
to middle position "STOP".
22. Set bar display to level 7 with turning
knob.
23. Push selection lever to right position
“HOT”.
24. Machine starts rinsing with hot water.
25. Machine stops rinsing and indicator
light blinks red for a few seconds.
26. Wait until selection lever moves back
to middle position "STOP".
STOP
STOP
Danger of dam-
age! Selection
lever and locking han-
dle are interlocked.
Only open the locking
handle when the selec-
tion lever is in the
"STOP" position.
Warning!
Hot water.
Handle rinsing tool
with care!
27. Open locking handle and pull out
capsule holder.
28. Open capsule holder and remove
rinsing tool.
29. Reinsert capsule holder.
30. Empty container.
31. Remove water tank and refill it with
fresh drinking water.
32. Insert water tank back into machine.