KSB BoosterControl Advanced - Quick Start Guide; Initial Setup Steps

4 Description
10 of 88
BoosterControl Advanced
4 Description
4.1 General description
▪ Control unit for pressure booster systems
With BoosterControl Advanced, up to 3 or 6 pump sets can be started, stopped and
controlled as a function of pressure.
4.2 Designation
Example: BCA 6
Table5: Key to the designation
Code Description
BCA BoosterControl Advanced
6 Number of pumps that can be connected
4.3 Name plate
BoosterControl 1.5 - 3P
P/N 01464675
S/N 010201211290018
Date 29-11-2012
Made in EU
230VAC
50/60Hz
IP20
15W
Warning!!!
High voltage
1
2
3
4
5
6
7 8
Fig.1: Name plate (example)
1 Type series, size 2 Ident. number
3 Series number 4 Year of construction
5 Input voltage 6 Mains frequency
7 Enclosure 8 Power input
4.4 Functions
Control system
Control of up to 3 or 6 pump sets as a function of pressure
The following functions, among others, are possible:
▪ Even distribution of operating hours among the pumps connected
▪ Automatic pump changeover
– as a function of operating hours
– in the case of a pump fault
▪ Pump starting and stopping in line with demand
▪ Functional check run
▪ Control of an inlet tank valve (for corresponding system configuration)