KSB BoosterControl Advanced - Page 72

10 Parameter list
72 of 88
BoosterControl Advanced
Parameter Description Factory setting Possible settings min. value max. value Read access right Write access right
3-8-1-1 Input 1
Configuration of input 1
None None,
forced start (check
run),
alt. setpoint,
leakage,
remote
acknowledgement,
bypass valve,
emergency power
- - Service Service
3-8-1-2 Input 2
Configuration of input 2
None None,
forced start (check
run),
alt. setpoint,
leakage,
remote
acknowledgement,
bypass valve,
emergency power
- - Service Service
3-8-1-3 Input 3
Configuration of input 3
None None,
forced start (check
run),
alt. setpoint,
leakage,
remote
acknowledgement,
bypass valve,
emergency power
- - Service Service
3-8-2 Outputs
Outputs
- - - - Service Nobody
3-8-2-1 Output 1 (P4)
Configuration of output 1
None None,
threshold 1,
threshold 2,
supply valve,
bypass valve,
lack of water
- - Service Service
3-8-2-2 Output 2 (P5)
Configuration of output 2
None None,
threshold 1,
threshold 2,
supply valve,
bypass valve,
lack of water
- - Service Service
3-8-2-3 Output 3 (P6)
Configuration of output 3
None None,
threshold 1,
threshold 2,
supply valve,
bypass valve,
lack of water
- - Service Service