Table 126: Accessories for dual pump/multiple pump configurations
Description Design Mat. No. [kg]
Dual pump module
(DPM)
Included in 01131684
but can also be
ordered separately.
Only for PumpDrive BASIC with
standard control panel for operating
two PumpDrives without redundancy
in operating mode 2 x 50 % or 2 x
100 %
47121257 0.08
Table 127: Bus cable accessories
Description Design Mat. No. [kg]
CAN bus cable, pre-
configured
Shielded CAN bus cable
for connecting
PumpDrive via KSB
local bus (CAN), with
wire end sleeves
Included in 01131684
but can also be
ordered separately.
Cable 2 x 2 x 0.22 mm², length approx.
1 m
01131429 0.3
CAN bus cable
Bus cable, cut to
length, for multiple
pump configurations,
shielded, twisted pair,
cable 2 x 2 x 0.22 mm²
Length 1 m 01111184 0.2
Length 5 m 01304511 0.4
Length 10 m 01304512 0.7
Length 20 m 01304513 1.4
Table 128: Accessories – Mounting kit
Description Design Mat. No. [kg]
Mounting kit for 2
pumps
Like DPM set of
accessories but without
DPM modules
Mounting kit comprising bus and
signal cables, 500-ohm measuring
resistor, wire jumpers
01131949 0.6
12 Purchase Order Specifications
PumpDrive
147 of 162
To Next Page
Loading...
