13 SERVICE WORK ON THE CHASSIS
102
– Press dust boots back into the installation position.
– Remove excess oil.
Finishing work
– Take the motorcycle off the front lifting gear. ( p. 100)
– Remove the rear of the motorcycle from the lifting gear.
( p. 99)
13.8 Removing the passenger seat (SUPER DUKE R)
S03911-10
– Insert the RACE ON key or the black ignition key into seat
lock
1
and turn it clockwise.
– Lift passenger seat at the front and pull it out of the bracket
toward the front.
– Remove the passenger seat.
– Remove the ignition key.
13.9 Mounting the passenger seat (SUPER DUKE R)
S03912-10
–
Hook recesses
1
of the passenger seat in guides
2
and
lower the front seat while pushing it back.
– Position the locking pin in the lock housing and push the pas-
senger seat down at the front.
The locking pin engages with an audible click.
– Check that the passenger seat is mounted correctly.
13.10 Removing the front rider's seat
Preparatory work
(SUPER DUKE R)
– Remove the passenger seat. ( p. 102)
To Next Page
Loading...
