7 COMBINATION INSTRUMENT
54
Warning
Danger of accidents When visibility is poor, the day-
time running light is not a substitute for the low beam.
Automatic switching between the daytime running
light and low beam may only be partially available
when visibility is significantly impaired due to fog,
snow or rain.
– Ensure that the appropriate type of lighting is
always selected.
– If necessary switch off the daytime running lights
using the menu before going on a ride or when
stopped so that the low beam is switched on per-
manently.
– Note the legal regulations regarding the daytime
running light.
– Press the UP or DOWN button until Daytime Runn. Light is
marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Daytime Runn. LightOFF or ON
is marked.
– Press the SET button to switch the daytime running light on or
off.
7.28.34 Setting the time and date
Condition
The motorcycle is stationary.
S03821-01
– Press RIGHT button when the menu is closed.
– Press the UP or DOWN button until Settings is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Clock/Date is marked.
Press the RIGHT button to open the menu.
S03820-01
Setting the clock
– Press the UP or DOWN button until the time is marked.
– Press the SET button.
The hour next to Clock flashes.
– Press the UP or DOWN button until the current hour is set.
– Press the RIGHT button.
The minute next to Clock flashes.
– Press the UP or DOWN button until the current minute is
set.
– Press the SET button.
The time is stored.
To Next Page
Loading...
