KTM 1290 SUPER DUKE R 2021 User Manual

13 SERVICE WORK ON THE CHASSIS
104
S04796-10
(SUPER DUKE RR)
–
Hook recess
1
of the front rider's seat into guide
2
,
lower it at the rear and push it forward.
– Position the locking pin in the lock housing and push down
the front rider's seat at the rear.
The locking pin engages with an audible click.
– Check that the front rider's seat is mounted correctly.
–
Position back cushion
3
and push it into holding lugs.
Finishing work
(SUPER DUKE R)
– Mount the passenger seat. ( p. 102)
13.12 Removing left fuel tank spoiler
S04082-10
–
Raise fuel tank cover
1
in area
A
and remove in the upward
direction.

KTM 1290 SUPER DUKE R 2021 Specifications

General

Displacement	1301 cc
Transmission	6-speed
Rear Suspension	WP APEX monoshock, fully adjustable
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Bore x Stroke	108 mm x 71 mm
Compression Ratio	13.5:1
Fuel System	Electronic fuel injection
Lubrication	Forced oil lubrication with 3 oil pumps
Wheelbase	1482 mm
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Engine Type	V-Twin, 4-stroke
Power	180 hp
Torque	140 Nm @ 8000 rpm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Front Brake	320 mm discs
Rear Brake	Brembo two-piston caliper, 240 mm disc
Clutch	PASC slipper clutch, hydraulically actuated
ABS	Bosch 9.1 MP (incl. Cornering ABS and Supermoto mode)