7 COMBINATION INSTRUMENT
52
Info
The Bluetooth
®
function can only be used in conjunction
with KTM MY RIDE (optional).
When the Bluetooth
®
function is switched on, cellphone
and helmet symbols appear in the KTM MY RIDE widget. As
soon as there is a connection between the cellphone and or
a headset, the symbols are displayed filled in. The signal
strength and the battery status of the cellphone are also
displayed.
Not every cellphone and headset is suitable for pairing with
the combination instrument.
7.28.29 Headset Type
S03831-01
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until Settings is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Headset Type is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until BT HEADSET
or CORDED HEADSET is marked.
– Press the SET button to confirm the selection.
Info
In the Headset Type menu, you can configure whether
a Bluetooth
®
headset or a wired headset is used.
With a wired headset, the volume cannot be controlled
via the combination instrument.
7.28.30 Display Theme
S03832-01
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until Settings is marked.
Press the RIGHT button to open the menu.
–
Press the UP or DOWN button until Display Theme is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until AUTOMATIC or NIGHT is
marked.
– Press the SET button to confirm the selection.
Info
In AUTOMATIC mode, the combination instrument auto-
matically switches to day or night mode depending on
the brightness.
In NIGHT mode, the combination instrument remains
permanently in night mode.
To Next Page
Loading...
