KTM 150 SX - 11.39-11.41 Frame, Swingarm, and Cable Checks

11 SERVICE WORK ON THE CHASSIS 71
11.39 Checking the frame
M01118-01
– Check the frame for cracking and deformation.
» If the frame exhibits cracking or deformation due to a mechanical impact:
– Change the frame.
Info
A frame that has been damaged due to a mechanical impact must
be replaced. Repair of the frame is not authorized by KTM.
11.40 Checking the swingarm
500285-01
– Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
– Change the swingarm.
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
11.41 Checking the routing of the throttle cable
Preparatory work
– Remove the seat. ( p. 56)
(All 125/150 models)
–
Turn handle

of the fuel tap to the OFF position.
(Figure M01127-10 p. 14)
(250 SX)
–
Turn handle

of the fuel tap to the OFF position.
(Figure B02072-10 p. 14)
(All XC models)
–
Turn handle

of the fuel tap to the OFF position.
(Figure L00904-10 p. 14)
– Remove the fuel tank. ( p. 63)