MAINTENANCE ON CHASSIS AND ENGINE 131
9.58Changing the fuses of individual power-consuming components
– Remove the front cover. ( p. 137)
– Switch off all power-consuming components and switch off the engine.
100090-10
– Open the cover of the fuse box .
Info
The designation of the fuses is located on the inside cover of the fuse box .
– Remove the faulty fuse.
Guideline
Fuse - 110A - ignition, CDI controller, indicator lamps ON, N, R
Fuse - 215A - high beam, low beam, parking light, tail light, brake light, high beam
indicator lamp
Fuse - 310A - radiator fan
Fuse - 410A - for auxiliary devices (permanent positive)
Fuse - 510A - for auxiliary devices (plus switched on with ignition switch)
Fuse er - res.10A/15A - replacement fuses
Info
You can recognize a blown fuse by its broken filament .
To Next Page