KTM 450 XC - Removing the Engine Guard; Installing the Engine Guard

MAINTENANCE ON CHASSIS AND ENGINE 144
9.71Removing the engine guard
600133-10
– Remove screws  and . Remove the engine guard.
9.72Installing the engine guard
600133-10
– Check parts for damage and wear. Replace damaged or worn parts.
– Position the engine guard on the frame bearer. Mount and tighten screws  and .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M8 25 Nm
(18.4 lbf ft)