MAINTENANCE ON CHASSIS AND ENGINE 168
9.91Mounting the oil filter x
600147-10
– Check parts for damage and wear. Replace damaged or worn parts.
– Fill the oil filters and with engine oil and place in the oil filter container.
600137-10
– Oil the O-rings of the oil filter covers and mount them with the oil filter covers. Mount
and tighten screws and .
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
– Connect the ground cable on the engine and tighten the screw.
Guideline
Screw, starter engine M6 10 Nm (7.4 lbf ft)
9.92Filling up with engine oil x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
To Next Page
Loading...
