MAINTENANCE ON CHASSIS AND ENGINE 166
600140-10
– Insert the oil screen with the O-rings into the plug screw and tighten.
Guideline
Locking screw, oil sieve,
short
M16x1.5 10 Nm
(7.4 lbf ft)
lubricated with
engine oil
600134-11
– Fit oil drain plug with seal ring and tighten it.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
– Install the engine guard. ( p. 144)
9.90Removing the oil filter x
Warning
Danger of scalding Engine oil and gear oil get very hot when the vehicle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
To Next Page