MAINTENANCE ON CHASSIS AND ENGINE 155
600123-11
– Remove the radiator cap . Completely drain the coolant.
600124-10
– Open the plug of the compensation tank .
– Remove the screws and empty the compensating tank .
– Check parts for damage and wear. Replace damaged or worn parts.
– Position the compensating tank . Mount and tighten screws .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Move the ventilation hose up.
– Mount and tighten the screws and with new seal rings.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
To Next Page