TIPS ON PUTTING INTO OPERATION 43
– Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
– Before your first trip, read the entire operating instructions carefully.
– Get to know the controls.
– Adjust the basic position of the clutch lever. ( p. 148)
– Adjust the basic position of the handbrake lever. ( p. 105)
–
Adjust the basic position of the footbrake lever. x ( p. 114)
– Become accustomed to handling the vehicle on a suitable piece of land before making a longer trip.
Info
When traveling offroad, you should be accompanied by another person on another machine so that you can help each other.
– Do not make any offroad trips that over-stress your ability and experience.
– Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
– Do not exceed the overall maximum permitted weight and the axle loads.
Guideline
Maximum permissible overall weight 293 kg (646 lb.)
Maximum allowable axle load
Front 144 kg (317 lb.)
Rear 149 kg (328 lb.)
– Run the engine in.
To Next Page
Loading...
