MAINTENANCE ON CHASSIS AND ENGINE 74
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
– Only make adjustments within the recommended range.
Info
The compression damping setting has an impact on the compression of the shock absorber.
100080-10
– Turn the adjusting wheel clockwise until it stops.
– Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping
Standard 17 clicks
Maximum deviation from standard
value
−5… 5 clicks
Tip
Experience has shown that settings outside of this range are detrimental to vehi-
cle handling. When changing the chassis settings, always start with the standard
setting.
Info
Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.
To Next Page
Loading...
