KTM 690 Enduro R EU 2013 - Removing Shift Shaft; Removing Shift Drum Locating; Removing Locking Lever; Removing Oil Pumps

17 ENGINE 119
17.3.26 Removing shift shaft
300066-10
– Push sliding plate 1 away from the shift drum locating 2. Remove shift shaft 3
with the washer.
17.3.27 Removing shift drum locating
300067-10
– Remove screw 1.
– Press locking lever 2 away from shift drum locating 3 and take off the shift drum
locating.
– Release the locking lever.
17.3.28 Removing locking lever
300069-10
– Remove screw 1.
– Take off locking lever 2 with the sleeve and spring.
17.3.29 Removing oil pumps
300070-10
– Remove the lock washers 1 and normal washers 2 from both oil pumps.
– Take off the oil pump toothed wheels 3.
300071-10
– Remove the pins 4 and washers 5.
– Remove screws. Take off the oil pump cover 6.