Program Mode
KB3 Editor: The EQ Page
6-69
KB3 Editor: The EQ Page
The four column headers on this page represent two shelving bands of equalization and two
parametric bands. The KB3 EQ oered here, though, is not implemented as a true EQ section;
instead, it adjusts the volume of the tone wheels based on frequency. If the tone wheels are based
on sine waves, then this acts similarly to a real EQ.
Parameter Group (Available for each EQ band) Range of Values
Gain -24.0 to 24.0 dB, in 0.2-dB increments
Frequency 16 to 25088 Hz, in varying increments
Width -128 to 128 Semitones, in 2-semitone increments
Each EQ section has Gain (G), Frequency (F), and Width (W) controls. Frequency controls the
center frequency of the band. Width controls the bandwidth. Gain controls the amount of boost
or cut.
To Next Page
Loading...
