Kurzweil PC3A - Low Velocity (Lovel), Highvelocity (Hivel)

7-16
Setup Mode
The Key/Velocity (KEY-VEL) Page
Low Velocity (LoVel), HighVelocity (HiVel)
LoVel and HiVel set the minimum and maximum velocity limits that the current zone transmits.
A keystroke in the current zone whose velocity — after it has been scaled and oset — is below
the minimum does not generate a Note On. Neither does a keystroke whose velocity after
processing is above the maximum. These parameters are useful for “velocity switching”—having
a key play dierent sounds depending on how hard you strike it.
The values can be anywhere from 1 to 127. As with other parameters, zones can overlap or be
totally discrete, or be identical. Usually, LoVel will have a smaller value than HiVel, but as with
LoKey and HiKey, you may also create a gap in velocity response, by setting negative ranges for
velocity.
MIDI Velocity
127
0
127
Strike Velocity
64
64
Velocity Min: 1, Max: 64
No MIDI Note Ons are transmitted when you strike
keys with medium velocity or greater
MIDI Velocity
127
0
127
Strike Velocity
64
64
Velocity Min: 64, Max: 127
No MIDI Note Ons are transmitted unless you strike
keys with velocity of medium or greater