7-34
Setup Mode
The Continuous Control Pedal (CPEDAL) Page
The Continuous Control Pedal (CPEDAL) Page
If you look at the back of the instrument, you will see that there are two jacks for plugging in two
CC (Continuous Control) pedals and a jack labeled Breath Controller. Like the nine
programmable sliders, you can assign these controllers on each of the 16 zones, or you can assign
any combination of these controllers to the same zone.
The CPEDAL page parameters are described in Continuous Controller Parameters on page 7-29.
Parameter Range of Values Default
Destination (CPed1) Control Destination List Express
Destination (CPed2) Control Destination List Foot
Destination (Breath) Control Destination List Breath
Scale ± 300% 100%
Add -128 to +127 0
Curve Linear, Compress, Expand Linear
Entry Value None, 0 to 127 None
Exit Value None, 0 to 127 None
To Next Page
Loading...
