Editing Conventions
Saving and Loading Files—Storage Mode
5-7
Special Button Functions
The Mode buttons and the Chan/Layer buttons have additional functions, depending on the
mode or editor you’re in. The table below describes some of these special button functions.
Button Special Function
Program
Mute 1
Mutes Layer 1 of current program in Program Editor.
Setup
Mute 3
Mutes Layer 3 of current program in Program Editor.
Q Access
Solo
Solos current layer in Program Editor.
Effects
FX Bypass
In Program Editor, bypasses (mutes) current program’s FX preset (plays program dry.) In
Chain Editor, mutes/unmutes currently selected effects box, and the Effect Mode button’s
LED will light when a muted effects box is selected, and unlight when an unmuted effects
box is selected.
MIDI
Mute 2
Mutes Layer 2 of current program in Program Editor.
Master
Mute 4
Mutes Layer 4 of current program in Program Editor.
Song
Mute Active
Mutes active layer of current program in Program Editor.
Storage
Compare
Negates effect of unsaved edits and plays last-saved (unedited) version of object being
edited in Program Editor.
Chan / Layer In Program Editor, these two buttons scroll through layers of current program; in Setup
Editor, scroll through zones of current setup; in Quick Access mode, scroll through entries in
current Quick Access bank; In Song Mode, change recording track.
Edit Whenever cursor is highlighting an editable object or parameter, takes you to corresponding
editor or programming page
To Next Page
Loading...
