Kurzweil PC3A - The Key;Velocity (KEY-VEL) Page

Setup Mode
The Key/Velocity (KEY-VEL) Page
7-9
The Key/Velocity (KEY-VEL) Page
The Key/Velocity page allows you to set key range, velocity range, transposition, and Note Maps
for each zone.
Note:MIDIvelocityofnotesplayedonthePC3AkeyboardarerstaectedbyanyVelocityScale,Oset,
andCurvesettingsmadeoneachzone’sKEY-VELpage.TheresultingvelocityisthenaectedbyanyVel
Map settings made on the Master Mode MAPS page (see page 11-1.) Also, MIDI velocities sent to the
USBorMIDIoutportarerstaectedasexplainedabove,andthenaectedbysettingsontheMIDImode
Transmit page (see page 10-1.)Oneachofthepagesmentionedabove,lookattheMIDIsignalowchartto
seewhichvelocitymapscanaectyourvelocitiesdependingonwhichMIDISources,MIDIDestinations
and operating mode that you are using.
Parameter Range of Values Default
Low Key C -1 to G9 C -1
High Key C -1 to G9 G9
Transpose -128 to +127 Semitones 0-
Note Map Note Map List Linear
Low Velocity 1 to 127 1
High Velocity 1 to 127 127
Velocity Scale ± 300% 100%
Velocity Offset -128 to +127 0
Velocity Curve
Velocity Curve List (seeVelocity Curve
(VelCurve) on page 7-14)
Linear