Storage Mode
Storage Mode Common Features
13-9
The LOAD Page
Pressing the LOAD soft button calls up the LOAD page (see below,) where you can load groups
of objects from .P3A, .PC3, .K26, .K25, or .KRZ les, individual objects from within those les, a
MIDI sequence le or les (.MID).
Use the cursor buttons, -/+ buttons or the alpha wheel to browse the les in the currently
selected storage device. See below for descriptions of the soft buttons on this page, which help
you browse and select the les in the currently selected storage device.
After selecting the le or les to load, press the OK soft button, and you will be prompted to
choose a bank to load the selected object(s) or MIDI le(s) into. See Loading Methods on page
13-11 for instructions on choosing a bank to load to after pressing OK.
Note: When selecting a le to load, le names on the Load page that are longer than eight
characters will be shortened to eight characters and spaces will be removed. (Thishasnoeecton
thenamesofobjectsstoredwithina.P3Aorothercompatibleletype.) When loading a MIDI le
(.MID) to Song mode, the PC3A will attempt to use the MIDI le’s internal sequence name as the
Song name. If the internal sequence name can not be loaded, the rst eight characters of the le
name will be used as the Song name. Shortened song names can be renamed in Song mode.
Select Select or deselect the highlighted le. An asterisk (*) appears to the left of selected
les. Multiple les can only be selected if they are in the same directory. Entering a
new directory will deselect all les.
SelAll Press the SelAll soft button to select or deselect all les in the current directory
(directories within the current directory will not be selected.) Entering a new
directory will deselect all les.
Parent Moves you up one level in the directory hierarchy. If the display is already at the root
directory, this button has no eect. Entering a new directory will deselect all les.
Open Open selected directory or view objects within a .P3A le or other compatible
Kurzweil le type for loading individual objects. See Loading Individual Objects From
a .P3A Or Compatible File Type below for instructions on opening .P3A and other
Kurzweil le types to view and load individual objects (see Appendix E for
compatibility details.) Entering a new directory will deselect all les. Viewing objects
within a .P3A le or other Kurzweil le will deselect any other les that had been
selected.
OK Load the selected .P3A le or other compatible Kurzweil le type. See Loading
Methods on page 13-11 for instructions on using the Load dialogue presented after
pressing OK.
Cancel Exits the Load page and returns you to the Storage mode page.
To Next Page
Loading...
Need help?
General
