Kurzweil PC3A - Page 180

7-54
Setup Mode
The Ribbon Conguration (RIBCFG) Page
Controller
Number
Corresponding
ARPEGGIATOR
Parameter
Operation
155 ArpVel Arpeggiator Velocity, each range of values selects one of
twenty-three options in order on parameters list: 0-5
First,) 6-10 (Played, etc.,) 11-15...101-105, 106-110,
111-127 (MissNotes9.)
156 ArpDur The Arpeggiator Duration % values are scaled over the
128 MIDI controller values, so that 0 = 1% and 127 =
100%.
157 Latch For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 =
on.
158 Latch2 For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 =
on.
159 ArpGliss Arpeggiator Gliss, 0-63 = off, 64-127 = on.
160 SusLatch For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 =
on.
170 -Arp Shift Sets ARPEGGIATOR values for Shift to negative. 0-63 =
off, 64-127 = on.
171 ShiftPatt Selects one of the 128 patterns in the ShiftPatt Bank for
the ARPEGGIATOR page of a controller’s zone.
172 ShiftPBank A controller value selects the corresponding ShiftPatt
Bank for the ARPEGGIATOR page of a controller’s zone.
For example, controller value 2 selects bank 2, controller
value 7 selects bank 7.
173 VelPatt Selects one of the 128 patterns in the VelPatt Bank for
the ARPEGGIATOR page of a controller’s zone.
174 VelPBank A controller value selects the corresponding VelPatt
Bank for the ARPEGGIATOR page of a controller’s zone.
For example, controller value 2 selects bank 2, controller
value 7 selects bank 7.
175 VelFixed Set’s arpeggiator velocity when velocity is set to Fixed for
the ARPEGGIATOR page of a controller’s zone.