Tutorial: Song Mode
15-13
3. On the EditSong:TRACK page, set the Function parameter to Erase (see below.)
4. Use the Chan/Zone buttons (to the left of the display) to choose the track to erase volume
automation from. You can view the selected track number in the upper right corner of the
screen.
5. Set the Events parameter to Controllers (see below.)
6. Set the Controller parameter to Volume. You can do this quickly by selecting the
Controller eld, entering 7 on the alphanumeric pad, and pressing Enter. Make sure the
LoVal parameter is set to 0 and the Hi parameter is set to 127 (see below.)
To Next Page
Loading...
