KYMCO DINK50 - Inspection and Maintenance Schedule

3. INSPECTION/ADJUSTMENT
3-1
INSPECTION AND MAINTENANCE SCHEDULE
(Note) 1. ○ means time for inspection.
2. ☆ means regular replacement for the specified parts.
This inspection and maintenance schedule is based upon average riding conditions.
Machines subjected to serve use, or ridden in unusually dusty areas, require more frequent
servicing.
Frequency
Inspection & Maintenance Item
Preride
1st
month
Every 6
months
Every 12
months
Judgment Standards
Remarks
Check for looseness
and vertical play
○
Steering
handlebar
Operating performance
○
○
Right/left turning angle
○
Suspension
Damage
○
○
Check for front fork
pivot installation
○
○
Check
steering
stem
Front
fork
Check front fork pivot
for looseness and
abnormal noise
○
Check
steering
stem
Front/rear brake lever
free play
○
○
Free play:
10_ 20mm
Brake lever operation
○
Brake
Lever
Brake performance
○
○
○
Lever/
Cable
Looseness, abnormal
noise and damage
○
○
Brake
System
Drum-to-lining
clearance
○
○
Brake shoe and lining
wear
☆
Indicator
type
Brake
drum/
shoe
Brake drum wear and
damage
○
Standard:
Front: 110 mm
Rear : 110 mm
Service Limits:
Front: 111 mm
Rear : 111 mm
Moving
Device
Tire
Tire pressure
○
○
○
Front
Rear
1
rider
1.75
kg/cm_
2.25
kg/cm_
Tire
Size
110/70-
12
130/70-
12
www.PlanDeGraissage.org