Inserting the seat:
Pull the seat lock (a) and guide the
seat into the seat support (1) from
above.
Let go off the seat lock and
engage the rotational adjustment
by turning the seat a little one way
then the other.
NOTE
If after inserting the seat it is
not possible to turn the seat or
to pull the seat lock, the seat is
not properly locked.
NOTE
Confirm the seat pin (2) for
smoothness.
If necessary, replace a new one.
Confirm if the seat pin is inserted
within the adjusting hole (3).
Inserting the seat
1 a
To Next Page
Loading...
