Appendix
-
specifications
66
19.2 Torque for fixing screws
Front wheel central self-locking bolt= 40 Nm
Rear wheel central self-locking bolt= 50 Nm
General torque for nuts and bolts:
M 5 = 4.5 to 6 Nm
M 6 = 8 to 12 Nm
M 8 = 18 to 25 Nm
M 10 = 30 to 40 Nm
M 12 = 50 to 60 Nm
19.3 Disposing of the scooter
The scooter consists of metal and plastic components, electronic
components, electrical cables and batteries.
Disposal of the individual materials must be carried out in accordance
with environmental and disposal regulations in the relevant country, and
may only take place after the scooter has been dismantled.
To dismantle the electromobile and to separate and dispose of the
materials, you would be advised to hand it over to your specialist dealer.
Batteries may not be disposed of in domestic waste, and must be
disposed of according to national regulations
To Next Page
Loading...
Need help?
General
