13.0
T
ranspor
ting the scooter
13.1 Transport information
Depending on the size of the transport vehicle, the scooter can be
dismantled in a few steps so that it can also be easily transported in
smaller vehicles.
When transporting, take particular care to ensure that the batteries are
securely fastened and make sure components cannot tip over.
No liability can be accepted for damage caused by transportation.
13.2 Transporting the complete scooter
No persons are permitted to sit on the scooter during loading!
No persons are permitted to sit on the scooter during transport!
Drive or push the scooter up a ramp into the vehicle.
Switch the engaging lever to drive mode.
Secure the scooter against tipping over by fastening it to the transport
vehicle with transport straps.
13.3 Preparation for transport - separating components
Clamping and crushing hazard!
Increased hazards due to clamping or crushing result due to the
high component weight (such as batteries) during preparation for
transport.
• Always
carry
out
any
work
to be done with great care.
• Always try to get
help
from a second person, especially when
sto
wing
par
ts f
or
tr
anspor
t.
To Next Page
Loading...
