KYMCO Mini LS Opearting Manual

Repairs - b atteries
63
17.6.2 Refitting battery cables
Fire and burn hazard if battery terminal is short-
circuited!
• Never touch the positive and negative battery terminals
sim ultaneously with metal par ts (short-circuiting).
Remove the battery case from the
scooter as described in chapter 13.
Remove all six bolts (1) on the bottom
of the battery case.
Put the battery case down on its
bottom side and open it.
Removing the batteries, to do this:
1. First remove the cable from the
battery
negative terminal (-).
2. Then remove the cable from the
battery positive terminal (+).
Insert the battery and connect the
battery
cables in reverse order:
1. First connect the cable to the
battery positive terminal (+).
2. Then connect the cable to the
battery negative terminal (-).
Close the battery case, screw in all
the bolts and tighten.
Opening the battery case
Loosening the battery cable
Connecting the battery cable

KYMCO Mini LS Specifications

General

Brand	KYMCO
Model	Mini LS
Category	Scooter
Language	English