KYMCO Mini LS - Charging the Batteries; Charging the Batteries in the Scooter Via the Tiller (22 Ah)

Charging the batteries
36
11.1 Charging the batteries
11.1.1 Charging the batteries
via the tiller
Switch off.
Engage the engaging lever for
push mode into the
“drive“ position.
It is imperative that you observe
the sequence for connecting
and disconnecting the battery
charger.
The jack socket (3) for
connecting the battery
charger is located on the tiller.
(1.) Connect the battery charger plug
(4)to the charging socket.
(2.) Connect the battery charger mains
plug (5) to a mains socket and
switch on.
NOTE:
The battery charger switches
on automatically when
connected to the mains.
Switching off
Engaging
Connecting the battery charger
OFF

