Driving
30
8.2 Turning the seat
The seat can be turned to both
sides of the angle, and firmly
engaged in 8 positions (each
position turns 45°).
Turning the seat:
Pull the turning lock (1), turn
the seat in the required
direction or position (2)
and engage.
Accident hazard due to
incorrect seat position!
• Always turn the seat to face
forwards and engage it before
driving.
If the seat has been turned, the
possibility of tipping is increased.
• Before turning the seat, always
ensure that the scooter is on an
even and solid surface.
8.3 Switching on
The switch is located on the
dashboard.
Insert the key into the switch
and turn it to the right to switch
on.
8.3.1 Operation indicator and
fault display
This light shows that the scooter is
switched on and ready for driving.
It also displays any errors in the
scooter electronics and electrical
system. Fault display takes place
using different blinking speeds or
blink sequences. You can find
more information in the chapter
entitled “Troubleshooting”.
Switching on
Operation indicator
To Next Page
Loading...
Need help?
General
