If the starter switch is pushed with the main
switch and neutral indicator light"ON", the
engine will be started. (MX'er 150/125) The
engine stop switch at " ", the starter motor
will be activated but the engine will not start.
To start the engine, be sure to position the
engine stop switch at " ".(Only MX'er 50)
NOTE:
1. Start switch
18
Engine stop switch " " " " (Only MX'er 50)
Make sure that the engine stop switch is in the
" position. The engine stop switch controls
ignition and can be used at all times to stop the
engine, especially in an emergency. The engine
will not start or run when the engine stop switch
is turned to " "
"
1. Engine stop switch (Only MX'er 50)
Start switch " "
The starter motor cranks the engine when this
switch is pushed.
See starting instructions prior to starting
engine (see page 44 for details).
CAUTION:
To Next Page
Loading...
