Kyocera Ecosys FS-1320D Technical Reference Manual

Epson LQ-850 Emulation (Mode 5)
7-23
You can alter these default SETF assignments to suit your own purposes. In the example
below, four of the SETF assignments are changed to proportional fonts, and the font
mode is changed to 15. The sample text is then printed by selecting pica for the title, elite
for the first paragraph, compressed for the second paragraph, compressed elite for the
third paragraph, and elite for the last paragraph.
!R! SETF 0, 12; CMNT Draft 10cpi: Swiss721BM12-Bold;
SETF 1, 2; CMNT Draft 12cpi: Dutch801BM10-Roman;
SETF 7, 13; CMNT Draft 15cpi: Swiss721BM8-Roman;
SETF 8, 14; CMNT Condensed 10cpi: Swiss721BM6-Roman;
EXIT;
To select a scalable font for the SETF assignments, first assign a font number to the scal-
able font by sending the command SFNT commands to the printing system as shown
below. The font number assigned should not duplicate a number already in use.
!R! SFNT ’Swiss742SWC-Bold’, 12, 3000, 277, 1, 0;
SFNT ’Dutch801SWC-Roman’, 10, 3001, 277, 1, 0;
SFNT ’Swiss742SWC-Roman’, 8, 3002, 277, 1, 0;
SFNT ’Swiss742SWC-Roman’, 6, 3003, 277, 1, 0;
EXIT;
All option parameters for SFNT (including symbol-set, compression, and angle) are
required for assigning font numbers to a scalable font when altering the SETF assign-
ments for the Epson emulation.
Landscape printing is possible in the LQ-850 mode. If you send the command
!R! SPOL; EXIT; the printing system rotates fonts and prints them in landscape ori-
entation.
In portrait orientation, the printing system supports Epson bit-image graphics, so with
graphics software for the LQ-850 printer, you can use it to print charts, graphs, and pic-
tures. The 9-bit graphics mode is also supported.
If you attempt to print beyond the right margin, the characters wrap around and are
printed on the next line.
Epson Prestige 10 cpi, 12 cpi, Proportional 6
15 cpi 7
Condensed 10 cpi 8
Condensed 12 cpi, Condensed proportional 9
Table 7.12. Epson LQ-850 Fonts (Sheet 2 of 2)
Font name Character spacing ALTF No.

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm