Kyocera Ecosys FS-1320D Technical Reference Manual

Chapter 7 Emulation
7-128
pagestackorder bool Get current stack tray
(true: face down, false: face up)
papersize name bool Get current paper size and orientation
string printername substring Get printing system name
product string Get printing system type
ramsize int Check available RAM size
realformat string Get native representation for real numbers in
binary tokens
revision int Get KPDL revision number
[integer ... integer] setcollatorstacker Set sorter to collator mode
job manual wait setdefaulttimeouts Set timeout values.
bool setdoprinterrors Set error-printing mode (true: print errors,
false: do nothing)
int setdoret Set KIR level
bool setdostartpage Select whether to print status page at power-up
(true: output power-on status, false: do not
output)
bool setdosysstart Set Sys/Start file reading mode at power-up
(true: execute Sys/Start, false: do nothing)
int setjobtimeout Set time-out value of current job
[integer ... integer ] setmailboxstacker Set sorter to mailbox mode
top left setmargins Set top and left calibration margins
int setmultirayid Set mail box identifier
bool setpagestackorder Set stack tray
(true: face down, false: face up)
old new setpassword bool Set printing system’ s password
string setprintername Assign string as printing system name
[integer ... integer] setsorterstacker Set sorter to sorting mode
int setuserdiskpercent Adjust disk size for use with KPDL
waittimeout int Get wait time-out value
a3 Set imageable area to A3 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
b4 Set imageable area to B4 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
a4 Set imageable area to A4 size. See KPDL
Printable Area. This operator is in userdict.
a4small Set imageable area to small A4 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
b5 Set imageable area to B5 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
dlenvelope
(110 x 220 envelope)
Set imageable area to International DL size.
See KPDL Printable Area on page 140. This
operator is in userdict.
11x17 Set imageable area to 11 x 17 (Ledger) size.
See KPDL Printable Area on page 140. This
operator is in userdict.
legal Set imageable area to legal size. See KPDL
Printable Area on page 140. This operator is in
userdict.
letter Set imageable area to letter size. See KPDL
Printable Area on page 140. This operator is in
userdict.
lettersmall Set imageable area to small letter size. See
KPDL Printable Area on page 140. This
operator is in userdict.
executivepage Set imageable area to executive size. See
KPDL Printable Area on page 140. This
operator is in userdict.
Table 7.46. KPDL Status Operators (Sheet 2 of 5)
Preceding stack Operator Result Description

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm