3-20
Basic Operation
7 Press the Confirm Destination key to confirm the
registered destinations.
Press the U or V key to select a destination and press
the OK key. Then, you can edit or delete the destination.
Press [Exit] (the Right Select key) to return to the basic
screen.
8 Press the Start key. Transmission starts.
NOTE: If the screen for confirming the destination before
transmission (page 8-88) is set to [On], the Confirm
Destination screen appears when the Start key is pressed.
For more information, refer to Confirm Destination Screen
on page 3-25.
To Next Page
Loading...
Need help?
General