Kyocera ECOSYS FS-3140MFP

3
3-21
Basic Operation
Send to Folder (SMB)/Send to Folder (FTP)
Stores a scanned original image file in the specified shared folder of any PC.
Stores a scanned original image in a folder of an FTP server.
NOTE:
• Refer to Help of your operating system for details on how to share a folder.
• Be sure that SMB Protocol or FTP in the COMMAND CENTER is On. For details, refer to the KYOCERA
COMMAND CENTER Operation Guide.
• Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the Send key.
Displays the screen for sending.
2 Press the U or V key to select [Folder(SMB)] or
[Folder(FTP)].
3 Press the OK key. Host Name(SMB) or Host Name(FTP)
appears.
4 Enter the host name.
NOTE: Destination can be specified using the Address
Book or the One-touch keys. Refer to Specifying
Destination on page 3-26.
5 Press the OK key. Path appears.
6 Enter the path name. Consider, that the share name but
not the folder name on the destination PC has to be
typed in.
7 Press the OK key. Login User Name appears.
Send to: a b
1 p E-mail
*********************
3 H Folder(FTP)
2 G Folder(SMB)
Host Name(SMB): A b
RD Center
*
ABC
[ Text ]
Host Name(FTP): A b
RD Center
*
ABC
[ Text ]
or
Path: A b
RD3\report
*
ABC
[ Text ]