8
8-147
Default Setting (System Menu)
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
POP3 Security 1 (2, 3)
Select the communication protocol according to the type of security employed by the POP3 server. The default setting
is Off.
NOTE: POP3 (E-mail RX) must be set to On in Protocol Detail on page 8-136.
The table below shows the available settings.
Use the procedure below to make the setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
Item Description
Off Do not use security employed by the POP3 server.
SSL/TLS Encryption is applied any data communication. Encryption is
applied any data communication. To enable POP3 security, the
POP3 port may have to be changed according to the server
settings. Typically, 995* for SSL/TLS is well-known POP3 port.
* You can change the port number using COMMAND CENTER.
STARTTLS Encryption is applied any data communication. Typically, 110* for
STARTTLS is well-known POP3 port.
To Next Page
Loading...
Need help?
General