Kyocera ECOSYS FS-3140MFP

8-148
Default Setting (System Menu)
4 Press the OK key. The Network Setting menu appears.
5 Press the U or V key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the U or V key to select [POP3 Security 1],
[POP3 Security 2] or [POP3 Security 3].
8 Press the OK key. POP3 Security appears.
9 Press the U or V key to select [Off], [SSL/TLS] or
[STARTTLS].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
SNMPv3 Setting
Sets up SNMPv3. The default setting is Off. Use the procedure below.
Refer to Protocol Detail on page 8-136 about the procedures.
Network Setting: a b
5 WSD-PRINT
6 IPSec
*********************
[ Exit ]
7 Secure Protocol
Secure Protocol: a b
4 LDAP Security
5 SMTP Security
*********************
[ Exit ]
6 POP3 Security 1
POP3 Security 1: a b
*********************
2 SSL/TLS
3 STARTTLS
1 *Off