No. Description Supplement
(42) Destination information -
(43) Area information -
(44) Margin settings Top margin/Left margin
(44) Margin/Page length/Page width
settings
Top margin integer part/Top margin decimal part/
Left margin integer part/Left margin decimal part/
(46) Life counter (The first line) Machine life/MP tray/Cassette 1/Cassette 2/
Cassette 3 /Duplex
Life counter (The second line) Maintenance kit
(47) Panel lock information 0: OFF
1: Partial lock
2: Full lock
(48) USB information 0: Not installed
1: Full speed
2: Hi speed
(49) Paper handling information 0: Paper source unit select
1: Paper source unit
(50)
Auto cassette change 0:Auto cassette change prohibition
1:Auto cassette change permission
(51) Black and white printing double
count mode
0: All single counts
1: A3, Single count, Less than 420 mm (length)
2: Legal, Single count, 356 mm or less (length)
3: Folio, Single count, Less than 330 mm (length)
(52) Billing counting timing -
(53) Temperature (machine outside) -
(54) Absolute temperature
(machineoutside)
-
(55) Fixed assets number -
(56) Job end judgment time-out time -
(57) Job end detection mode -
(58) Priscribe environmental reset
0: OFF
1: ON
(59) Media type attributes
1 to 28 (Not used: 18, 19, 20)
* : For details on settings,
refer to MDAT command
in āPrescribe Commands
Reference Manual.
Weight settings
0: Light/1: Normal 1 / 2: Normal 2 / 3: Normal 3/
4: Heavy 1 / 5: Heavy 2 / 6: Heavy 3 / 7: Extra
Heavy
Fuser settings
0: High / 1: Middle / 2: Low / 3: Vellum
Duplex settings
0: Disable / 1: Enable
To Next Page
Loading...
