xx
> About the Operation Guide (this Guide)
Conventions used in procedures for operating the machine
In this Operation Guide, continuous operation of the keys on the touch panel is as follows:
Size and Orientation of Paper
Paper sizes such as A5 can be used in both the horizontal and vertical orientations. To distinguish the orientations when
these sizes are used, "R" is added to sizes used in the vertical orientation. In addition, the following icons are used to
indicate paper placement orientations on the touch panel.
Actual procedure Procedure indicated in this guide
Select the [System Menu] key.
Select [ ].
Select [Common Settings].
Select [Sound].
[System Menu] key > [Common Settings] > [Sound]
Orientation Setting Position
(X=Length, Y=Width)
Icons on the touch
panel
Indicated size in this
Guide
*1
*1 Paper sizes that can be used vary depending on the function and source tray. For details, refer to the following.
Specifications (page 11-19)
Vertical
orientation (-R)
Cassette A5-R
Multipurpose
tray
A5-R
Horizontal
orientation
Cassette A5
Multipurpose
tray
A5
To Next Page
Loading...
