10-32
Troubleshooting > Adjustment/Maintenance
Adjustment/Maintenance
Overview of Adjustment/Maintenance
If there is an image problem and the message to run adjustment or maintenance menu appears, run
Adjustment/Maintenance in the system menu.
The table below lists the item you can Procedure.
Drum Refresh
Remove image blur and white dots from the printout.
1
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Drum Refresh]
2
Perform the drum refresh.
Select [Start]. "Drum Refresh" begins.
Item Description Reference Page
Drum Refresh Remove image blur and white dots from the printout. page 10-32
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
To Next Page
Loading...
