6-2
Using Various Functions > Functions Available on the Machine
Functions Available on the Machine
About Functions Available on the Machine
This machine provides the various functions available.
Copy
To configure the settings for functions, select the function key. By selecting [Functions], other selectable functions will
be shown as a list.
For details on each function, see the table below.
Function key Description
Reference
page
Paper Selection Select the cassette or multipurpose tray that contains the required paper size. page 6-9
Zoom Adjust the zoom to reduce or enlarge the image. page 6-10
Density Adjust density. page 6-11
Duplex Produces two-sided prints. You can also create single-sided prints from two-sided
originals.
page 6-12
Combine Combines 2 or 4 original sheets into 1 printed page. page 6-14
Collate Offsets the output by page or set. page 6-16
Functions Description
Reference
page
Original Size Specify the original size to be scanned. page 6-17
Original Orientation Select the orientation of the original document top edge to scan correct direction. page 6-18
Mixed Size Originals Scan the documents of different sizes that are set in the document processor all at
once.
page 6-19
Original Image Select original image type for best results. page 6-19
EcoPrint EcoPrint saves toner when printing. page 6-20
Sharpness Adjusts the sharpness of image outlines. page 6-20
Contrast You can adjust the contrast between light and dark areas of the image. page 6-21
Background Density
Adj.
Removes dark background from originals, such as newspapers. page 6-21
Skip Blank Page When there are blank pages in a scanned document, this function skips the blank
pages and prints only pages that are not blank.
page 6-22
Functions
Original Size
A4
Close
10:10
Original Orientation
Top Edge on Top
Text+Photo
Off
Mixed Size Originals
Original Image
1/2
Add/Edit
Shortcut
Ready to copy.
Ready to copy.
Copy Copies
Paper
Selection
Zoom Density
Duplex Combine Collate
1-sided>>1-sided
A4 100% Normal 0
Off
Functions
10:10
Favorites
Off