Kyocera ecosys M2735DW

6-23
Using Various Functions > Functions
Job Finish Notice
Sends E-mail notice when a job is complete.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
NOTE
PC should be configured in advance so that E-mail can be used.
Command Center RX (page 2-52)
E-mail can be sent to a single destination.
Item Description
Off Disables the function.
On Displays the destination list.
Add a Destination
To add a new destination, select [Menu] > [Add].
• Address Book: Select the notification destination from the address book and select [OK].
• Ext. Address Book
*1
: Select the notification destination from the external address book.
• Address Entry: Enter the e-mail address directly. Enter the address (up to 128 characters)
and select [OK].
• My Address
*2
: Uses the e-mail address of the logged in user.
*1 For details on the External Address Book, refer to the following:
Command Center RX User Guide
*2 Displayed when user login administration is enabled.
Check the Destination
To display details for the destinations, select [ ].
Delete the Destination
To delete the selected destination, select [ ].
Copy
Print from
USB
Send
Scan to
USB