Kyocera ecosys M2735DW

8-31
Setup and Registration (System Menu) > System Menu
Bonjour
IPSec
Protocol Settings
Configure protocol settings.
Item Description
Protocol Setting Select whether to use Bonjour.
Value: Off, On
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value: Disable, Enable
Available Network (Wi-Fi)
Available Network
(Wired Network)
Item Description
IPSec Make this setting when you use IPSec.
Value: Off, On
Item Description
NetBEUI -
Protocol Setting Selects whether to receive documents using NetBEUI.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network (Wi-Fi)
Available Network
(Wired Network)
LPD -
Protocol Setting Selects whether to receive documents using LPD.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network (Wi-Fi)
Available Network
(Wired Network)
SMTP (E-mail TX) Select whether to send E-mail using SMTP.
Value: Off, On
POP3 (E-mail RX) Select whether to receive E-mail using POP3.
Value: Off, On
FTP Client (Transmission) Select whether to send documents using FTP. When selecting [On], set the FTP Port Number.
The default port number is 21.
Value: Off, On (Port Number: 1-65535)