2-47
Installing and Setting up the Machine > Installing Software
2 Select the driver to be installed.
3 Click [Utilities] tab and select the utility to be installed.
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name.
Installation may fail if the host name is specified.
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and that it
is turned on and click (Refresh).
• If the desired device does not appear, select [Add custom device] to directly select the
device.
To Next Page
Loading...
Need help?
General