Kyocera ECOSYS M3860idnf User Manual

6-26
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
(Value: [Off] / [On])
Job Finish Notice
Sends E-mail notice when a job is complete.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
NOTE
PC should be configured in advance so that E-mail can be used.
Command Center RX (page 2-58)
E-mail can be sent to a single destination.
Item Description
Off Disables the function.
Job Finished Only,
Job Finished + Job Interrupted
Displays the destination list.
Add a Destination
To add a new destination, select [ ].
• Address Book: Select the notification destination from the address book and select [OK].
• Ext. Address Book
*1
: Select the notification destination from the external address book.
• Address Entry: Enter the e-mail address directly. Enter the address (up to 256 characters)
and select [OK].
• My Address
*2
: Uses the e-mail address of the logged in user.
*1 For details on the External Address Book, refer to the following:
Command Center RX User Guide
*2 Displayed when user login administration is enabled.
Check the Destination
To display details for the destinations, select [ ].
Delete the Destination
To delete the selected destination, select [ ].
Copy
Send
Scan to
Box
Scan to
USB
1~10
1
1~30
1
11~20
11
21~30
21
Copy
Print from
Box
Print from
USB
Send
Send from
Box
Scan to
Box
Scan to
USB

Kyocera ECOSYS M3860idnf Specifications

General

Brand	Kyocera
Model	ECOSYS M3860idnf
Category	Printer
Language	English