5-45
Operation on the Machine > Using a Custom Box
Joining Documents in Custom Box
You can join documents within a custom box into one file.
1
Display the screen.
Select [Custom Box] on the Home screen > Select the box.
2
Join the document.
1 Select the documents in the list that you wish to join by selecting the checkbox.
The document is marked with a checkmark.
You can join up to 100 documents.
2 Arrange the documents in the order they will be joined. > [Menu] > [Join] > [OK]
Highlight the document you want to move and then use [Cancel] and [Clear]] to move it.
3 Enter the name for the joined document > [Next >]
Enter up to 64 characters as the document name.
4 Select [Yes].
The documents are joined.
You can only join a document to other documents in the same custom box. If necessary, move the documents to be
joined beforehand.
If a custom box is protected by a password, enter the correct password.
To cancel a selection, select the checkbox again so that it is no longer ticked.
Character Entry Method (page 11-10)
After joining, the original documents are left unchanged. Delete the documents if they
are no longer needed.
To Next Page
Loading...
Need help?
General